Aero
Pre-order
Front three-quarter view of the AERO A-01 showing the padded tongue in the throat opening and the elastic gusset joining it to the sides of the vamp.
Rear three-quarter view showing the welded TPU heel clip wrapping the collar and the black pull tab.
Front-on view showing the width of the toe box and the opening of the collar.
Straight-on heel view showing the closed, structured heel counter in tonal black.
High-angle quarter view looking down onto the shoe, showing the line of the throat where the tongue meets the vamp.
Macro of the toe showing the knit texture of the upper and the bite line where the black welt meets the white midsole.

AERO A-01

Laceless slip-on trainer · black knit, white EVA, black rubber

$70

Free shipping and 30-day returns. This is a pre-order: you pay now and your pair ships from 30 September 2026. Cancel any time before it goes into production.

Between sizes? Take the smaller one. The collar gives; the length doesn't. Size guide

Go to bag
Pay with Apple Pay Google Pay Card
Ships
From 30 September 2026
Sizes
S, M, L
Returns
30 days, any reason
Care
Machine wash cold · air dry only

Every angle, one light.

Forty-eight frames rendered from the master model, so the light never shifts as it turns. Scroll to orbit it, or just grab it and drag.

01/48 000° Drag

Seven components.
Two need hard tooling.

Everything above the midsole is soft-tooled: the knit program, the weld dies, the cut dies. Only the midsole and the outsole need moulds. That is this shoe's entire cost structure in one sentence, and it is why the next AERO can be a new upper on the same sole rather than a new shoe from scratch.

Macro of the white A mark applied to the black knit panel, with the weave of the upper visible around it. Applied mark · 57 × 30 mm at M
Upper
Recycled PET knit unverified
Midsole
EVA 45C unverified
Outsole
60 Shore A unverified
Stack
38 / 23 mm · 15 mm drop
Lugs
93 at 2.8 mm
Colourway
Black knit · white EVA · black rubber

The figures marked unverified are typical values for this construction, not factory quotes. Each one gets replaced with a measured number as the manufacturer confirms it.

True to size —
the collar stretches.

S
US 7–8
M
US 9–10
L
US 11–12
Last at M
300 × 104 mm
Toe allowance
10.4 mm · standard is 10–15
Heel room
8.5 mm
Ball of foot
−0.6 to +0.9 mm
Waist
−1.3 mm · snug on purpose

We modelled a US Men's 9 foot, 274 × 99 mm, put it inside the shoe, and measured the clearance at 49 stations along its length. The slight interference through the midfoot is deliberate. On a shoe with no laces, that is what keeps it on your foot. Engineered knit gives 3 to 6 mm under load.

That is a geometric validation against a modelled last. It is not a wear test on real feet and we have not run one yet.

Top-down view of the AERO A-01 showing a one-piece upper with no lacing, no eyestay and no eyelets, and the padded tongue centred in the throat. No lacing anywhere

What it isn't for. A laceless collar can't be tightened. This is an everyday and gym shoe, not distance running and not lateral court sport. We would rather lose the sale here than take the return later.

Wash it.
Don't cook it.

Cold cycle, mesh bag, sockliner out and washed separately. Nothing on the outside of this shoe is stitched, so there is no seam to come apart in the drum.

Air dry only.

Heat delaminates welded overlays and warps EVA. No tumble dryer, no radiator, no hot car. That is the one instruction that matters, which is why it is here and not hidden on a label inside the shoe.

Being straight with you: washability is how this shoe is built, not a tested result. We have not yet destroyed a production sample in a machine to prove it. When we do, the number goes here.

Upper
Machine wash cold, mesh bag
Tongue and gusset
Washes with the upper
Overlays
Welded, nothing to unravel
Sockliner
Remove, wash separately, dry flat
Midsole
Closed cell, does not absorb water
Outsole
Wipe clean
Drying
Air dry only, away from heat

One shoe. One mark.
Seventy dollars.

Add to bag Questions first
$70Choose a size
Add to bag

Sign in

By creating an account you agree to our terms and privacy policy.